1406 – Fibre glass 5’ x 5’ Tank only.

1404 – Fibre glass 4’ x 4’ Stainless steel Gate type Agitation

1402 – Fibre glass storage tank 5’ x 5’ Stainless steel Gate type Agitation

1394/PV – Fibre glass Ark 5’ x 5’ with paddle type Agitator

1353/PV – 5ft x 5ft Fibreglass tanks only. 4 available

1351/PV – Edwards & Jones 4ft 6″ diameter x 4ft 6″ long porcelain lined Ball Mill complete with “A” frame supports and 7.5 HP drive.

1350/PV – Edward & Jones 2 ft diameter x 2 ft long porcelain lined Ball Mill complete with”A” frame supports and 2 HP direct gearbox drive.

1349/PV – Steele & Cowlishaw 5ft diameter x 5ft long porcelain lined Ball Mill complete with “A” frame supports and 10 HP drive.

1348/PV – William Boulton 7 ft diameter x 7 ft long ceramic lined Ball Mill complete with “A” frame stands, drive and loading platform plus feed conveyor.

1279/PV – WILLAIM BOULTON 7 ft diameter x 7 ft long Silex lined Ball Mill, complete with drive. Capacity Approximately 2000 Kgs

1259/PV – Steele & Cowlishaw 2ft x 2ft Ball mill, Porcelain lined.

1369/PVR – William Boulton 6ft x 4ft steel blunger, round, high speed.

1354/pv – William Boulton High Speed Blungers, steel tanks 5ft across x 4ft deep complete with drives. 11 available

1352/PV – William Boulton High Speed Blunger, 4ft diameter x 4ft tall rubber lined tank complete with cross bridge and drive.

1338/PVDN – William Boulton Paddle Blunger, Fibreglass tank 4 ft x 4 ft complete with drive

1321/PVHM – One WILLIAM BOULTON 6 ft x 4 ft High Speed Blunger

1319/PVHM – One WILLIAM BOULTON 7 ft x 5 ft medium speed paddle blunger

1319/PV – William Boulton 4ft x 4ft slow speed fibreglass blunger. 250 gallons. 7.5kW motor.

1296/PVMA – EDWARDS & JONES Slow Speed Blunger, 7 ft across x 4 ft deep, Stainless Steel Shaft and blades. 20 Hp motor drive. 1 available.

1295/PVMA – EDWARDS & JONES High Speed Blunger, 7 ft across x 4 ft 6 inches deep, Stainless Steel Shaft, rotor and Stator. 60 Hp motor drive. 1 available.

1294/PVMA – EDWARDS & JONES High Speed Blungers, 7 ft across x 4 ft deep, tile lined with Stainless Steel Shaft, rotor and Stator. 40 Hp motor drives. 2 available.

1158/PV – 4ft x 4ft slow speed blunger, 350 gallon — one available

1156/PV – Edwards & Jones 30″”x36″” medium speed blunger, 200 gallon, one available

1153/PV – William Boulton 3ft 6in x 3ft 6in medium speed blunger, fibre glass tank — one available

1306/PVAT – Laboratory/trial Tile glaze dipping line

1315/PVEE – Two Garol battery casting machines 1998

1350/PV – SERVICE ENGINEERS Model C flatware roller machine complete with clay cutter and spreader.

1311/PVEE – SKK flatware roller machine

1279/PVHT – DORST Model SRH V1 Universal roller machine, complete with mould take off device and automatic ware dryer.

1139/PV – Service engineer model B flatware roller making machine for plates up to 25cm diameter – one available

1342 – Malkin Model 375 five colour screen printing machine suitable for glass and ceramic hollowware

1307/PVTS – SAKURAI Model SC72A decal printing machine complete with Wicket Dryer. Fully refurbished

1264/PV – MALKIN Model 283 universal banding and lining machine

1263/PV – SERVICE ENGINEER Model TT200 flatware pad printing machine. In ‘as new’ condition.

1124/PV – Malkin 280, three and four station lining and banding machine, 15 pieces per minute (flatware) — two available

1285/PVJL – DUST PRESSES ( 1139) NETZSCH Model 230.20 Isostatic press complete with finishing station. Date of Manufacture 1986

1270/PV – Dorst Isostatic press (P1), type: PIT 500, nr: 75780/1 (1981), closing pressure: max. 500.000 kg., with finish carousel, transfer station, heap down carousel + 1 dust exhaust filter installation, provided with increase belt. Output up to 600 pieces per ho

1267/PVT – DORST Model PIT 500 isostatic dust press, 1983

1357/PV – KEMA Model PVP/25S Stainless Steel contact parts de-airing pug mill complete with drive and vacuum pump.

1314/PVEE – Vicentini 350mm pug mill extruder

1286/PVJL – PUGMILLS ( 1153) NETZSCH Model 250.10 laboratory extruder. Date of manufacture 1979

1282/PVC – Kema PVP25 extruder, stainless steel, up to 8 tons per hour, 150mm dia.

1318/PVHM – One WILLIAM BOULTON 37 off 915mm x 915mm polypropylene plates, 23 off cast steel plates High Pressure 20 Bar

1210/PV – William Boulton AM100 vibro energy mill, capacity 100 gallons (450 litres). Rubber lined — one available

1358/PV – Wet back spray booth, internal dimensions 3 ft wide x 2 ft deep x 2 ft 6” high, complete with pump and extractor fan

1344/pv – One DYNACLEAN wet back spray booth.

1184/PV – Radicon gearbox 30/1 ratio — two available

1377/PV – Glaze Dipping machine. Voit Sama Triplex, model 251, year of manufacture 1991. Capacity: 1500 pcs/hour depending on article size & shape. Dia. article foot: 55-240mm Max. article diameter: 380mm Max article height: 180mm.

1284/PVRV – Two used NETZSCH Model SME 200 Annular Gap Mill, suitable for continuous production of ceramic glaze 30Kw drive.

1284/PV – Service Engineers 2 head handle attaching machines.4 available

PV/2001 Kiln Services electric Kiln

1356/PV – K&F 24 cu ft electric truck kiln, one car 2 ft wide x 3ft deep x 4ft high

1355/PV – K&F 24 cu ft electric fixed hearth kiln, placing 3 ft wide x 2ft deep x 4ft high

1354/pv – Used glass fusing kiln BVD 6.1-250/PS Max temp 1000°C Inner dimension: 2100 x 1200 x 250 mm

1353/pv – Electric Kiln, 20 cu ft internal capacity, 1300 oC, double door type complete with 2 cars.

1346/pv – DIS gas kiln, 50 cu ft, 1300 oC, complete with one car, two burners and controls.

1343/pv – One Kiln engineering circular decorating kiln, 10 ft diameter, max placing height 7″, max temp 700 oC

1341/PVP – RIEDHAMMER 12.8 CuM gas fired kiln, 1450 oC complete with 20+ kiln cars. New in 1991

1332/PVSO – One S. L. Electrotech(Instrumentation) Ltd Thermal Expansion measurement system, Model S195 for single or double sample testing. Computer controlled.

1323/PVSO – One KILNS & FURNACES Thermal Gradient kiln, single chamber, Model TG9ST

1287/PV – Kilns & Furnaces electric kiln, built in 1986, maximum temp-1200 deg C. Capacity 146 cu. ft. Setting dimensions 30 inches w x 108 inches d x 78 inches h. Automatic roof vent and base vents. Control panel with 4-zone programme control.

1330/PVSO – One KILNS & FURNACES Thermal Gradient kiln, six chambers, Model TG6.

1329/PVSO – One KILNS & FURNACES Thermal Gradient kiln, single chamber, Model TG9ST

1328/PVSO – One MARCHANT Triple Roll Mill 150 mm long x 75 mm diameter

1327/PVSO – One COX Triple Roll Mill 150 mm long x 75mm diameter

1325/PVSO – One BROOKFIELD / SHEEN Viscometer, Model ERV-8

1306/PV – Selection of Porcelain Pots, 3 x 12 inch x 12 inch, 3 x 9 inch x 9 inch

1305/PV – William Boulton 3 tier Pot Roller, 3 ft 6 in long rollers

1299/PV – One Torsion Viscometer laboratory equipment.

1303/PV – In-line Stainless Steel pipe magnets 2inch diameter, 8 available.

1302/PV – 5 bar magnet complete with polypropylene funnel

1249/PV – Boxmag 2″” in line stainless steel magnet single rod

1194/PV – Ele Fantini vibratory dry magnet, 4in diameter feed

1347/PV – DCE 253 G3 two available

1322/PVCR –

1304/PV – Hydrovane Model 25PU compressor, 20 cfm

1255 – SS Silo

1254 – DCE 152 & 154 dust collectors.

1345/pv – One High speed glaze mixer 10 KW drive complete with hand operated hydraulic lift.

1340/PVDY – One EIRICH Model R08 mixer, 1984.

1301/PV – Eirich R11 Inclined Intensive Pan mixer, Serial No. 23478, Capacity 250L/400kg, direct dual speed 13.5/15kW drive agitator.Pan: 5.5kW with hydraulic central discharge. 400V-3ph-50Hz. 1985

1289/PV – Unishear mixer, stainless steel, Model No. UN10S, 10HP motor, 2250 litres mixing capacity, shaft 76cm long x 26cm dia.

1282/PV – One used UNISHEAR High shear mixer, 7.5 KW motor, complete with vertical lifting stand and control panel. Manufactured -2003 Overall length:- 2.3 M Shaft length:- 1.5 M Rotor diameter:- 15 cm

1275/PVJ – Selection of HOBART Mixers.

1261/PV – Winkworth mixer, type RL40, mild steel. *

1182/PV – Plaster blender, one available

1407/pv – Netzsch Model 225.01. 1991

1297/PV – Netzsch pressure casting machine type 225.01, 1995, closing pressure 650kN, max. article area at 40 bar slip pressure:1600cm2, at 30 barslip pressure:2150cm2

1347/PVR – Wilden air pump. 2″” and Blagdon air pump 1.1/2″”

1308/PV – 4 x WILDEN Model M8 2” air pumps 2 x WILDEN Model M2 1” air pumps

1304/PVRM – Willett 6 ” Ram Pump, stalk valve, 10Bar

1301/PV – Thomas Willett 6 inch diameter Ceramic Ram Pumps, complete with electric changeover and hydraulic power packs. Operating pressure 10 Bar but can be modified to 20 Bar Two available

1168/PV – Thomas Willett 4in stalk valve ram pumps, complete with hydraulic power packs, 150psi operating pressure — four available

1167/PV – Thomas Willett 4in stalk valve ram pumps, complete with hydraulic power packs, 300psi operating pressure — two available

1166/PV – Thomas Willett 6in stalk valve ram pumps complete with hydraulic power packs, 150psi operating pressure — 10 available

1165/PV – Thomas Willett 6in ball valve ram pump, complete with hydraulic power packs, 150psi operating pressure — one available

1293/PV – Simkin 30T plastic clay press.

1292/PV – Simkin 50T plastic clay press.

1266/PV – RAM 90T press.

1265/PV – SIMKIN 60T press

1309/PV – One used Foot Wiper.

1227/PV – SCS 2 Head flat sponging machines – two available

1126/PV – CCS/CLH vertical spongers (holloware) — four available

1125/PV – CLH footwipers — three available

1351/PV – William Boulton 26” diameter two deck sieve

1307/PV – BOULTON 36 inch diameter stainless Steel vibratory sieve 2003

1300/PVRM – William Boulton 48″ two deck sieve

1274/PVJ – Powder sieve 20 inch diameter

1263/PV – Russell Finex 19″” diameter sieve, single deck.

1217/PV – 48″” Boulton 1 deck ST/ST 1500 or 3000 RPM – one available

1214/PV – 48″” Boulton 1 deck ST/ST 3,000 RPM – one available

1246/PV – WM boulton FM40E rubber lined vibro 6ft dia. for biscuit polishing

1181/PV – 6ft ware trolleys, complete with boards — 20 available