REFERENCE |
DESCRIPTION |
|
| Pedistal Casting |
|
AW107 |
Semi Automatic pneumatic Pedestal casting machines
2off
Approx 220 pedastals produced for each casting process
on each machine |
 |
|
AW108 |
PLC/HMI control casting system installed |
|
|
AW109 |
30 Punka ceiling fans installed in cast area
for drying |
|
|
AW110 |
Steel Storage tanks 10ftx10ft. No shaft/motor/gearbox
fitted |
|
|
AW111 |
Non-Agitated Casting run off sumps (2off). |
|
|
AW112 |
Mono D6D slip return pumps/GEC & BCP 3kW
motors with Omron level controls |
|
|
AW113 |
Broomwade air reciever 65"x36" |
|
|
| Beam Casting |
|
AW114 |
Semi Automatic Beam casting machines 14off |
|
|
AW115 |
PLC/HMI control casting system. Header tank with
omron level probe slip control |
|
|
AW116 |
15 Maico 240V/110V high speed drying fans fitted
to each beam |
|
|
AW117 |
Manual demoulders fitted to each beam |
|
|
AW118 |
24 position drying stillage complete with rotating
ware boards |
|
|
AW119 |
2off 1Ton demag hoists providing 2 Tons SWL for
each beam |
|
|
AW120 |
Agitated Casting run off sumps (3off). 1500 widthx2500
height. ABB 1.5kW motor/Renold 50/1 gearbox |
|
|
AW121 |
M50 (2") Wilden air slip return pumps (2off
each sump) with EH level controls |
|
|
| Basin/Lid Casting |
|
AW122 |
Semi Automatic Shanks Battery casting machines
6off/12 casting rows |
|
|
AW123 |
PLC control casting system. Header tank with
omron level probe slip control |
|
|
AW124 |
12 BCP 240V/110V high speed drying fans fitted
to each beam |
|
|
AW125 |
Lifting benches/Drying stillage installed to
each casting bench. 2.2kW motor/gearbox
These have a parallel shaft connected along the bench
to 3 screw lifting shafts |
|
|
AW126 |
Agitated Casting run off sumps (2off). 1800 widthx2100
height. ABB 1.1kW motor/Renold 60/1 gearbox |
|
|
AW127 |
M50 (2") Wilden air slip return pumps (1off
each sump) with EH level controls |
|
|
| Cistern Casting |
|
AW128 |
Pneumatically assisted cistern casting units |
|
|
AW129 |
56 mould locations with pneumatic mould lifting
cylinders |
|
|
AW130 |
Vacuum lifting mechanism for demoulding |
|
|
AW131 |
18 BCP 240V/110V high speed drying fans fitted
to each beam |
|
|
AW132 |
Fan assisted under mould drying system |
|
|
AW133 |
Lifting benches/Drying stillage installed to
each casting bench. 2.2kW motor/gearbox
These have a parallel shaft connected along the bench
to 3 screw lifting shafts |
|
|
| Trial Cast Tank |
|
AW134 |
Fibreglass tank 1400 heightx1600 diameter. Radicon
motor 1.5kW/gearbox 93.79/1 |
|
|
| Organ Fans |
|
AW135 |
Brook 22kW fan unit (2off) B_O_B Type T285W |
|
|
